82,739
Description
- Package Description:�1 RingServing Size:�..Number of Servings:�...
- DESCRIPTION DETAILS FACTS DIRECTIONS WARNINGS Replacement O-ring for the Two Little Fishies Phosphate Reactor 150. The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of PhosBan or other filter media. By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media. One reactor is for aquariums up to 150 gallons. Multiple reactors may be used for larger aquariums. Package Description: 1 Ring Serving Size: .. Number of Servings: .. Important Notes: Do not use a media bag in the PhosBan Reactor. Simply place PhosBan or other media inside it according to the instructions. Don’t over or under fill the column. Max 5 in (13 cm) of media, min 2 in (5 cm). When using only activated carbon, the entire column can be filled. PhosBan may be mixed with phosphate-free activated carbon. This can provide the necessary media volume when less than 100 grams (190 ml) of PhosBan is used. Do not place ball valve on the exit pipe. Restricting the flow on the exit pipe pressurizes the reactor and can cause leaks. Preparing the Reactor Unpack the reactor. Open reactor lid by turning counter clockwise. Check parts list to confirm that all parts are present. The reactor is supplied with all the parts needed to operate it except for the hose and pump. The pump used can be a powerhead, such as a Maxijet 500, or the supply of water can be tapped off of a circulating pump already in use on the aquarium. The pump should have 100-200 gph (380-760 l/hr) capacity, although the flow must be reduced using the supplied ball valve. If the center tubes are not already glued to the dispersion plates, insert the end of the 9 inch center tube into one dispersion plate until it stops, and slide one of the sponges onto the tube so that it rests on top of the dispersion plate. Insert this assembly into the reactor column. It may be necessary to use tongs or a yardstick to keep the lower sponge resting on top of the dispersion plate when you insert it into the reactor column. Add about 1 cup of water to the reactor. Use a yardstick or tongs to push out the large air bubbles trapped in the lower sponge. 1a. Adding PhosBan Media Before adding PhosBan to the reactor, temporarily cover the top of the 9 inch center tube with a piece of tape. This will prevent PhosBan from entering the tube when you add it to the column. To minimize dust evolution, wet the PhosBan first. Use a large spoon or scoop to put the PhosBan into the reactor. After adding PhosBan to the reactor column, remove the tape from the center tube. 1b. Finishing the Reactor Assembly Attach the remaining dispersion plate onto the top of center tube. Insert the remaining 2 inch length of rigid tube into the top of the dispersion plate (if not glued already). Slide the remaining sponge on top of the center tube above the dispersion plate. Press it down to be sure it is sitting flat all the way around the dispersion plate. Inside the top of the lid there is a flat plastic washer and on top of it an O-ring. Check to be sure the O-ring is seated properly. With the reactor sitting upright, attach lid on top of the reactor body by inserting the center collar (located on the underside of the lid) over the top of the center tube. Rotate lid on the threads until it becomes stiff (hand-tight) to seal and close the reactor. Do not over-tighten! The flat washer allows slippage and makes it easier to open the reactor. It is otherwise not necessary. 2. Locating the Reactor The PhosBan reactor can be seated upright in the cabinet, in the filter sump, upright on the floor below the aquarium or hanging on the side or rear of an aquarium. For hanging installations, use threaded bolt provided in the base plate to level it against the aquarium wall. Wherever it is located, the reactor must be upright and level to operate properly. To prevent any risk of back-siphoning, the outlet of the water return hose should not be loc.
Reviews
TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring
Related Pages
Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Uzbekistan. For more details, please visit our Support Page.
Frequently Asked Questions About TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring in Uzbekistan
Where can I buy TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring online at the best price in the Uzbekistan?
desertcart is the best online shopping platform where you can buy TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
Is TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring available and ready for delivery in Uzbekistan?
desertcart ships the TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring to Tashkent, Samarkand, Andijon, Namangan, Qoqonand more cities in Uzbekistan. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring speedily without the hassle of shipping, customs or duties.
Does desertcart have 100% authentic TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring online?
desertcart buys TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Is it safe to buy TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring on desertcart?
Yes, it is absolutely safe to buy TWO LITTLE FISHIES - Replacement O-Ring for PhosBan Reactor 150 - 1 Ring from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.